5 Common Problems With Breville Espresso Machine: All You Need to Know

A coffee machine is essential for every coffee lover, especially those who cannot go a day without coffee. Therefore, most coffee drinkers would buy a coffee machine or an espresso machine at home to ease their convenience and save some money for coffee at branded cafes.

Some coffee lovers may be familiar with Breville espresso machines as it is one of the most well-known coffee machines in the market due to their convenience and user-friendly features. Having Breville in your home would make your daily coffee intake more refreshing and full of joy. Even though it is beneficial, it comes without a saying that the coffee machine also has flaws.

This article will give customers common problems while using Breville and solutions to those issues.

About Breville

Before getting into Breville’s common problems, it is essential to learn about Breville. It is an Australian brand founded in 1932 that sells small household appliances such as coffee machines, blenders, microwaves, ovens, grills, and many more. For coffee lovers familiar with Nespresso coffee machines, Breville manufactured many coffee machines for them and distributed them in countries like New Zealand, Australia, and the US starting in 2016.

Breville Espresso

Breville Espresso Machines

Breville established its first espresso machine in the 2000s and has gained recognition. It is known for its durability, as most devices are made from stainless steel. Moreover, the machines are user-friendly, which adds another good point for all users.

Additionally, their espresso machines are favored due to the high pressure that can drive water into the coffee in just a few seconds and provide the best shots. The manufacture of the machines is also well recognized, including the automatic, semi-automatic, and manual machines that provide varied flavors.

Common Problems

Like any other coffee machine, Breville occasionally prompts technical errors or malfunctions, such as breaking the water tank, water not heating up, and more. Here are the top 5 common issues of the coffee machine:

5. Weak Pressure

Pressure is arguably essential to having a delicious cup of espresso. You need pressure and temperature to pump the water correctly because when the force is too weak, it will go through the coffee beans in the portafilter too fast, which results in fast coffee extraction and leads to a sour or soft taste of coffee. It is also important to note that good pressure should be when the pressure gauge needle lands between the gray area.

YOU MAY ALSO LIKE:  AeroPress vs. French Press: Which One Is Best for Your Need?

If you encounter this problem, we have a solution for you. First and foremost, it is essential to double-check whether your espresso machine’s pump is malfunctioning correctly. To do so, you can start by inserting the pressurized basket into the portafilter. Make sure there are no beans, and start the machine by pressing the 1-cup button. With this, you can verify the pressure gauge of your device by the nine bars. If it goes below the nine bars, it means that the pump is not getting enough water and needs a replacement, and if it goes above the nine bars, you need to alter the variables for the pressure to increase.

Moreover, you can increase the pressure by a few methods. One of which is to enlarge the quota of coffee beans. The force can be weak due to little amount of coffee beans and a large amount of water. Hence you can try increasing the coffee beans to around 8 to 10 grams for a shot of espresso and up to 18 grams for double shots. Another way is by changing the grinder setting; the grind size should be refined to ensure water does not go through quickly. A grind size of 5 is an ideal one for a good shot.

4. Heating Issues 

Heat is another common problem of Breville machines as sometimes the device might not heat up enough for a hot coffee. Sometimes your machine might usually be working but just does not get hot. Several reasons can be factors to this issue, including problems with the thermal fuse, switch, thermostat, or switch.

The first thing you should do when facing this problem is to check the switch. Most of the time, the power switch can be overworked so that you may change the button to a new one. However, if the switch is not the problem, it may be the control board. Hence, you may try pressing the buttons on the machine; if it does not respond, you need to change the control board.

Additionally, a thermostat is a component that measures and monitors the flow of the coffee’s temperature. If the temperature is too hot, it will signal the machine to shut off. However, sometimes the thermostat does not function properly, so it is essential to check if it is in the proper position. If it is already in the correct place but still does not work, you may need to replace it.

YOU MAY ALSO LIKE:  How to Clean Cuisinart Coffee Makers? An Ultimate Guide with Easy Steps Included

3. Not Pumping Water

Another frequent problem Breville’s customers face is water blockage, as the machine would not pump water to make coffee. This problem can appear for several reasons, including vapor lock, which is when you start to fill in the machine as soon as it becomes hot, making the hot air lock the pump.

To avoid this problem, you need to keep the machine cool for around 15 to 20 minutes after using it and ensure that the head screen is clean, and then you can add fresh, clear water to the water reservoir. However, you can still fix it immediately by following a few steps. Firstly, you must fill the water tank with clean and clear water and put a cup under the brew and steam wand. Next, put it to rest for about two minutes before starting the brewing process for another two minutes. After that, you should run a few tests on the machine to see if it pumps water properly; for instance, ensure that the lines are not blocked and straight.

Moreover, dirt can also build up and clog the water pumping system, which is also needed to clean dirt. Additionally, the filter can block the water pumping when the coffee’s grind is too fine, requiring a double check.

2. Milk Frother

Milk Frother is essential for some coffee drinkers who want an extra milky taste in their espresso. However, sometimes the milk frother does not work correctly, resulting in a disappointing taste of milk foam and coffee.

To fix the problems, first, you must ensure that the coffee beans you choose are finely ground to have the coffee beans soft and slushy milk creme. If you use burnt coffee beans, it will not turn your coffee creamy or milky.  Moreover, if the water is too hot or cold, the milk crema will not be produced. Hence it is essential to use the proper water temperature, around 195 Fahrenheit.

Another explanation is that your espresso equipment cannot exert enough pressure to turn the milk into milk cream. You can know by the time it takes to make a single shot of espresso because it should take from 20 to 30 seconds. Hence, if it is below or exceeds the mentioned time, you should replace the machine’s equipment.

YOU MAY ALSO LIKE:  How to Clean the Ninja Coffee Bar? An Ultimate Guide with Simple Ways You Should Know!

1. Burnt Taste Coffee

The last but not least problem of Breville is the typical burnt taste of coffee after brewing. Some reasons can explain the problem, one of which is that the coffee beans are over-extracted, making the coffee grind lately with the boiling water, which makes the coffee bitter.

You can solve this problem simply by crushing the coffee grounds into slightly smaller pieces or have another alternative for the beans, which is the capsule. Moreover, remember to close the containers carefully to keep the coffee fresh and add a little salt to reduce the strong taste.

Breville Coffee Machine


How to clean a Breville espresso machine?

Cleaning is crucial to make your espresso machine run properly and ensure a comfortable taste of coffee for your daily intakes. You can clean your machines daily and weekly and have a deep cleaning once in a while.

For daily cleaning, you can clean it at the end of the day after each usage by remembering to wipe the stream wand after using the machine and have a backflush to clean the pipes if you are equipped with the pressure model. Additionally, you can perform a weekly cleaning in a few steps. Firstly, you need to fill cold water in the water tank, then put an empty portafilter into the machine and start running it several times. After that, you can remove the water from the filter and continue the process four times until the water is clean.

Can a Breville espresso machine make regular coffee?

Unfortunately, you cannot make a regular coffee with the espresso machine because espresso is made by pumping hot water into the coffee grounds. However, you can create one if you have a dual-purpose coffee machine.


Breville is undoubtedly one of the most convenient coffee machine brands that provide various functions. However, it also has some issues that may affect your daily coffee intake. We have summarized the common problems and solutions to tackle those issues and hope it could help you if you are encountering one.

Scroll to Top